MIL-HDBK-304C 9.1.3.4 Test Procedure. Determine the length, width, and thickness of each specimen per paragraph 9.1.2 and weigh to within 0.1% of total specimen weight. 9.1.3.5 Calculation. 9.1.3.5.1 Density (English). Density should be calculated as follows: w D = ___________ = lb / cubic inches ( 9:1 ) L W T Where D = density in pounds per cubic inches w = specimen weight in pounds L = specimen length in inches W = specimen width in inches T = specimen thickness in inches 9.1.3.5.2 Density (Metric). Density should be calculated as follows:
w D = ___________ = kg/mm 3 ( 9:1 ) L W T Where D = density in kg/mm 3 w = specimen weight in kilograms L = specimen length in millimeters W = specimen width in millimeters T = specimen thickness in millimeters 72 Dow nloaded from https://www.everyspe