everyspec MIL-HDBK-695D — everyspec MIL-HDBK-695D: Руководство по срокам хранения резиновых изделий

Downloaded from https://www.everyspec.com MIL-HDBK-695D e. Non-aerospace bulk hoses and hose assemblies (surface vehicle, industrial and marine application). Consult SAE J517 for age control limits for acceptance of non-aerospace bulk hoses and hose assemblies. g. Composites in which the rubber is in admixture with other ingredients, for example, rubber-asbestos packings and rubber-cork gaskets. f. Unvulcanized rubber, such as tread repair stock and tank lining sheet stock. h. Subassemblies, assemblies and systems which contain elastometric items as component parts, such as small arms, weapons, vehicles, aircraft, missiles and space vehicles. i.

Products fabricated from flexible materials that are not elastomeric, for example, some plastics. 1.3 Application. The information contained in this handbook is intended as a guide for use by those agencies whose responsibility it is to place control requirements on rubber products, as well as by those activities whose responsibility it is to control the age of products stocked in Government storage facilities. The handbook is not intended for use in controlling the age of rubber products prior to their acceptance by the Government or by Government contractors.

The handbook does not make mandatory the disposition of rubber products that have been in storage longer than the periods recommended. The decision as to whether or not to dispose of "overage" products is a function of the storage, supply or using facilities. Responsible activities should make every attempt to limit the procurements of rubber products to the extent that large volumes of "overage" products will not be accumulated in storage. Where feasible and economically practical, "overage" products should be tested to determine whether or not they meet the requirements of the applicable specifications.

Procurement documents should require the mold marking of the cure date, such as the year and month on the rubber product (or on its package) and careful records kept of the cure date of all stored rubber products. When age limitations of the detail specification listed herein conflict with the requirements herein, the requirements of the detail specification will govern. 2. APPLICABLE DOCUMENTS 2.1 General. The documents listed below are not necessarily all of the documents referenced herein, but are those needed to understand the information provided by this handbook. 2.2 Government documents.

Department of Defense Index of Specifications and Standards (DODISS) (available from Standardization Document Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094 or on-line at http://assist.daps.dla.mil/quicksearch/ or http://www.dodssp.daps.mil ). 2.3 Non-Government publications. The following documents form a part of this document to the extent specified herein.

SAE AS 1933 Age Controls for Hose Containing Age-Sensitive Elastomeric Material SAE ARP 5316 Storage of Aerospace Elastomeric Seals and Seal Assemblies Which Include an Elastomer Element Prior to Hardware Assembly SAE J517 Hose, Hydraulic (Application for copies should be addressed to the Society of Automotive Engineers, Inc., 400 Commonwealth Drive, Warrendale, PA 15096-0001 or on-line at http://www.sae.org .) 2