Downloaded from https://www.everyspec.com MIL-HDBK-310 4.3.4Engineering Analyses and Trade-Offs. The natural environmental values selected from this handbook are to be used as inputs to the engineering analyses of materiel responses to the ambient environment. If the initially selected values prove unacceptable because of technical or cost considerations, the additional climatic information presented in Appendix A may be helpful in conducting trade-off analyses. 4.4 Organization and Contents. Section 5 is subdivided into three major parts that are further subdivided as follows:
(a) 5.1 Worldwide Surface Environment (b) 5.2 Regional Surface Environments 5.2.1 Basic Regional Type 5.2.2 Hot Regional Type 5.2.3 Cold Regional Type 5.2.4 Severe Cold Regional Type 5.2.5 Coastal/Ocean Regional Type (c) 5.3 Worldwide Air Environment to 80 km 5.3.1 Atmospheric Envelopes 5.3.2 Atmospheric Profiles Each of the subdivisions above provide discussion of the climatic information contained in that subdivision, their applicability, and values recommended for initial consideration. Each of these is further broken down into data presentations for individual climatic elements or combinations of elements. 4.5 Relationship with MIL-STD-810.
MIL-HDBK-310 is a source of information that should be used to derive climatic test values required by MIL-STD-810. The relationship between the two standards is shown in the following diagram: IDENTIFY & DEFINE NATURAL CLIMATIC DESIGN ENVIRONMENT REQUIREMENTS MIL-HDBK- 310 ITEM (MATERIEL) DEFINE CHARACTERISTICS PLATFORM AND OPERATIONAL ENVIRONMENT REQUIREMENTS TEST IDENTIFY PLATFORM PROCEDURES CHARACTERISTICS MIL-STD-810 4