everyspec.com — everyspec.com — MIL-HDBK-310: Global Climatic Data for Developing Military Products (PDF Manual)

Downloaded from https://www.everyspec.com MIL-HDBK-310 5.1.22.2 Frequency of Occurrence. Due to the nature of this climatic condition, frequency of occurrence expressed as a percent of the time does not apply. An occurrence of 20 cycles during the worst month is recommended. This would occur in low elevation, mid-latitude areas such as central Germany. Concurrent weather would be dew points, -2 ° C to 1 ° C, a trace or more of precipitation on the day of the cycle, and the occurrence of fog. 5.1.22.3 Long-term Extremes. Not applicable. 5.2 Regional Surface Environments.

For determining climatic design criteria for materiel not intended for worldwide use, the land and sea surface areas of the world are divided into 5 regional types of climate (see 4.2 for applicability and limitations). The four types representing land environments are partitioned on the basis of temperature during the worst month in the most severe part of the regional type. The four land regional types and their defining temperatures are: (a) Basic Regional Type - One-percent cold and hot temperatures of -31.7 ° C (-25 ° F) and 43.3 ° C (110 ° F) during the worst month in the coldest and hottest parts of the regional type, respectively.

(b) Hot Regional Type - Hotter than basic regional type with a 1-percent temperature of 49 ° C (120 ° F) in the hottest parts. (c) Cold Regional Type - Colder than basic regional type with a 1-percent temperature of -45.6 ° C (-50 ° F) in the coldest parts. (d) Severe Cold Regional Type - Colder than the cold regional type with a 20-percent temperature of -51 ° C (-60 ° F) in the coldest parts. Areas of the world where these 4 regional types prevail are shown in Figure 1 (page 101).

The climatic data for the land regional types are presented differently than that for the Coastal/Ocean Regional Type (section 5.2.5), the Worldwide Surface Environment (section 5.1), and the Worldwide Air Environment (section 5.3). These provide climatic information for a wide range of meteorological elements, whereas climatic data for each of the land types are presented in the form of daily weather cycles associated with 1-percent hot and cold temperature values that define each regional type (20 percent for severe cold type) and 1-percent humidity values (see 4.2(a) and 4.2(b)).

The basic regional type, which encompasses by far the largest land area of the 4 types, comprises 5 different daily weather cycles; the hot type has 2 cycles; and the cold and severe cold types require only 1 cycle each to define their conditions. 5.2.1Basic Regional Type. The basic regional type includes all the land areas of the world that have neither extremely high nor extremely low temperatures, as defined above. The basic type incorporates most of the mid-latitudes, which are often referred to climatically as temperate, moderate, or intermediate zones.

It also includes the humid tropics, which are warm throughout the year, but do not record the extremely high temperatures that occur in the hot regional type. The basic type is roughly coincident with the more densely populated, industrialized, and agriculturally productive areas of the world; therefore, most of the land areas with the highest probability of combat operations are within its limits. 26