NAVSEA MIL-HDBK-802(SH) — MIL-HDBK-802(SH) Design of Electrical Equipment with Small Stray Magnetic Fields Manual PDF

Downloaded from https://www.everyspec.com MIL-HDBK-802(SH) 2 July 1990 In machines with four or more poles the magnetic fields produced by the individual poles cancel each other and leave only a residual field that is much smaller than the field from one pole alone . Rotary amplifier type exciters that have more than two physical poles but only two main magnetic poles should never be used on minesweepers . These will have the same stray magnetic field characteristics as other two-pole machines, and since they are necessarily machines of some size, will be highly objectionable. Four poles will probably be enough for most dc motors and generators except for the minesweeping generators.

Each individual case must be carefully studied and more poles must be used if there is any doubt that four are enough. (b) (c) Minimization of stray magnetic field Produced by the connections to the field coils. Figure 74 shows the preferred and non-preferred methods of making connections to the field coils. The advantage of the preferred method is that there is no turn around the shaft of the machine, as there is in the non- preferred method. The turn around the shaft would be a large current loop that would produce a large stray magnetic field Therefore, the preferred method must be used.

The field connections must all be on the same end of the machine and should be as close together as possible. 7.2.3.7 128