NAVSEA MIL-HDBK-802(SH) — MIL-HDBK-802(SH) Design of Electrical Equipment with Small Stray Magnetic Fields Manual PDF

Downloaded from https://www.everyspec.com MIL-HDBK-802{SH) 2 July 1990 3 3.2.4 Avoid enclosure of magnetic material in current loops. If we consider a current loop around a bulkhead or a mast (see figure 5) made of magnetic material, we will find that the magnetic material will be strongly magnetized by the current, and the magnetic field strength will be very much greater than it would be if the magnetic material were removed. Situations such as those shown on figure 6 (A) must also be avoided. Here we have a bulkhead that is not enclosed by a current loop but is located between two current loops of the same polarity.

By drawing hypothetical conductors at the ends of the current loops (see figure 6 (B)), we see that the bulkhead is, in effect, enclosed by two current loops, a small one and a large one. The small loop will produce a greater field at the bulkhead than the large loop, hence, the effect will be much the same as if the bulkhead were enclosed in a current loop.