Downloaded from https://www.everyspec.com MIL-HDBK-802(SH) 2 July 1990 3.4 Illustration and measurement of stray magnetic field. 3 4.1 The effect of conductor shapes on stray magnetic fields. 3 4.1.1 Introduction. As stated earlier, a stray magnetic field is an unwanted field produced by a current source. In 3.4,1.2 and 3.4.1.3 we will review four conductor shapes that are the most basic sources of 2 stray magnetic field. The magnetic field due to these sources is dependent upon the following factors: (a) Shape and orientation of the conductor. (b) Magnitude and direction of the current. (c) Radial distance from the source point to the point of interest of the magnetic field.
The mathematical formulas for the magnetic fields generated by current sources can be derived from the law of Biot-Savart (also known as Ampere’s law for the current element). The actual derivation of the formulas is beyond the scope of this handbook. Therefore, for the four basic conductor shapes discussed in 3.4.1.2 and 3.4.1.3 only the final form of the formula (and not the derivation) will be given For this explanation we are concerned with the shape of the conductor in order to illustrate the variations in the magnetic fields. 3.4.1.1.1 Right-hand rule. The right-hand rule is a method of determining the direction of a vector after a cross product has been computed.
In this handbook we will be concerned only with the direction of the resultant vector and not with the q ethod of computing the cross product. For a current loop the right- hand rule is used as follows: (a) Curl the fingers of your right hand around the coil in the direction of the current. (b) Your extended thumb will then point in the direction of the resultant vector. 3.4.1.2 Straight wire. First let us consider the most basic of all conductor shapes, a straight wire. We will see that there are two distinct expressions for the magnetic field produced by a straight wire. The difference between the expressions is based upon the effect of varying the length of the wire.
We will consider the cases of a wire of infinite length (see 3.4.1.2.1) and a wire of finite length (see 3.4.1.2.2). 3.4.1.2.1 Infinitely long straight wire. A current in an infinitely long straight wire will produce a magnetic field which curls around the wire perpendicular to the direction of the current at all points in space. Thus, a current in the x direction will produce a magnetic field with y and z components, a current in the y direction will produce x and z components, and a current in the z direction will produce x and y components.
As an example, we will assume that the infinitely long straight wire lies along the z axis (see figure 9), The formula for the magnitude of the magnetic field (B) of the wire at some point in space is as follows: 8