NAVSEA MIL-HDBK-802(SH) — MIL-HDBK-802(SH) Design of Electrical Equipment with Small Stray Magnetic Fields Manual PDF

Downloaded from https://www.everyspec.com MIL-HDBK-802(SH) 2 July 1990 3.3.4 Calculating stray magnetic field. When iron and other magnetic materials are absent, the magnetic field produced by any arrangement of current- carrying conductors can be computed to any desired degree of accuracy by the expenditure of sufficient time and effort. Alternately, any arrangement of conductors can be replaced by one or more current loops that together produce the same magnetic field as the original arrangement of conductors. The advantage of this procedure is that the magnetic field produced by current loops can be calculated to an adequate degree of accuracy by reasonably simple formulas.

3.3.5 Theory of desire for small stray magnetic field. The theory of designing electric circuits and equipment with small stray magnetic fields is based upon calculating the magnetic fields produced by different combinations of current loops, and picking out the combinations that give a small stray magnetic field. In view of the importance of being able to calculate the magnetic field produced by current loops. this handbook is arranged as follows: (a) Formulas for calculating the magnetic field produced by single current loops are contained in 4.2. Derivations are not given because they are not essential for use of the formulas.

(b) Formulas for computing the magnetic field produced by various combinations of two, four, six, or eight current loops of equal strength are contained in 4.3. Appendix A is included, however, to outline a method of deriving these formulas so that a user who needs a formula for a combination not covered in 4.3 can derive a formula to meet his needs. (c) Section 5 is devoted to a discussion of general principles of designing electric circuits and equipment for small stray magnetic fields. (d) Section 6 is devoted to the application of these principles to specific items of equipment. (e) Appendix B provides a list of the equations used in the handbook and the pages on which they can be found.

3.3.6 Organization of handbook. Parts of this handbook will not be of equal interest to all readers. The designer of a disconnect switch will not be vitally interested in the material that deals with the design of generators, nor will the designer of generators be vitally interested in the material that deals with the design of disconnect switches. Nonetheless, it is highly desirable that each user of this handbook make himself generally familiar with its contents so that he will be able to pick and choose the material he needs to best advantage. Each user of the handbook should do the following: (a) Thoroughly master sections 3, 4 (excluding 4.3), and 5.

(b) Be sufficiently familiar with paragraph 4.3 to know where to find the formulas he may need in the course of his work.