Downloaded from https://www.everyspec.com MIL-HDBK-802(SH) 2 July 1990 stray magnetic field from the coil. If we increase the current, the stray mag- netic field will increase. If we move the magnetometer around, we will find that the stray magnetic field is large near the coil, is smaller at greater distances, and is too small to measure at still greater distances. Now we place the magneto- meter at a convenient distance from the coil, disconnect one terminal so that the current in the coil is zero, and place an iron core in the coil. The magnetometer shows that the magnetic field changes when the iron core is placed in the coil. The change is not, however, the stray magnetic field.
It occurs because the iron has a permanent magnetization and is magnetized by induction due to its presence in the earth’s magnetic field. The permanent and induced magnetizations produce a magnetic field around the iron. Leave the iron core in the coil and measure the change to the magnetic field that occurs when the battery is connected, thus applying current to the coil. This change is the stray magnetic field. Experiments made with and without the iron core in the coil will show that the stray magnetic field is different in the two cases. Other experiments with different coils and circuits will show that the stray magnetic field depends upon the following:
(a) The arrangement and number of current-carrying conductors. (b) The magnitude of the current. (c) The distance from the circuit or coil. (d) Whether or not magnetic materials are present in the vicinity of the circuit or the magnetometer. 3.4.1.5.2 A large-scale experiment. Suppose that we place the magnetometer at the bottom of a ship channel. With no ships or other movable sources of magnetic field around, the magnetometer will read the earth’s magnetic field at the bottom of the ship channel. We will call this magnetic field A. Next we bring up a ship having a generator aboard and moor it over the magnetometer.
Suppose that initially the generator is not running and that no electric currents exist anywhere in the ship. The magnetic field at the bottom of the channel will be different from field A because of the permanent and induced magnetization in the iron of the generator and other magnetic material in the ship. We will call this magnetic field B. Next, we bring to the ship a source of electric current, which is arranged such that it has no stray magnetic field. We connect this source of current to degaussing coils that are arranged to produce a magnetic field that is, as nearly as possible, equal and opposite to B - A (B minus A).
When the degaussing coils are energized, we will call this magnetic field C. Finally, with the degaussing coils still energized, we start the generator and apply current to it and its connected circuits and equipment. The stray magnetic field from the generator and its connected circuits and equipment will be superimposed upon the existing field C, and w1ll cause the resultant field to be different from C. We will call this magnetic field D. We thus have four magnetic fields:
A for no ship, B for a ship with iron but no current (even in the degaussing coils), C for a ship with iron and current in the degaussing coils but nowhere else, and D for a ship with current in the degaussing coils and other electric circuits and equipment. The differences between these fields can be identified as follows: (a) B - A is the undegaussed magnetic field of the ship. (b) C - A is the degaussed magnetic field of the ship. 13