NAVSEA MIL-HDBK-802(SH) — MIL-HDBK-802(SH) Design of Electrical Equipment with Small Stray Magnetic Fields Manual PDF

Downloaded from https://www.everyspec.com MILL-HDBK-802(SH 2 July 1990 (c) D - C is the stray magnetic field of the ship. (d) D - A is the total magnetic field of the ship. 3.5 How a magnetic mine works. A magnetic mine has a device to detect the change in the earth’s magnetic field that occurs when a ship approaches the mine. If the change in the earth’s magnetic field is large enough to actuate the detecting device, it fires the mine and destroys or damages the ship. 3.6 How a magnetic mine can be defeated. A magnetic mine will be defeated if there is no change in the magnetic field when a ship approaches a mine, that is , if A- C - D.

Expressed somewhat differently, this condition is that the ship degaussed magnetic field, C - A, the ship stray magnetic field, D - C, and the ship total magnetic field, D - A, are all equal to zero. Where this is the case, the ship is “magnetically invisible" it cannot be detected by the mechanism in a magnetic mine, and therefore can pass close to the mine in safety. It is particularly important to make the magnetic field of a minesweeper as small as possible because minesweepers must venture into minefield and perhaps pass directly over magnetic mines before sweeping them.

The safety of the minesweeper and of every man aboard depends upon how well the men who design and build the ship and its machinery do their part in making the ship magnetic field as small as possible. 3.7 How a ship magnetic field can be made equal to zero. Since a ship magnetic field is caused either by magnetic material or electric currents, or both, in principle it is very easy to make the magnetic field equal to zero. All that we need to do is the following: (a) Use nothing but nonmagnetic materials in the construction of the ship. (b) Make it impossible for electric currents to flow anywhere in the ship. 3.8 Practical ways of minimizing. ship magnetic fields.

Many things that are very simple to do in principle are by no means simple to do in practice. Take, for example, a minesweeper that is to be used for sweeping magnetic mines. The two conditions that would make its magnetic field equal to zero are given in the preceding paragraphs, but we can use neither for the minesweeper. We cannot eliminate electric current because we need large currents for the minesweeper to do its job of sweeping magnetic mines. We cannot eliminate all magnetic materials because the most feasible way of obtaining the large currents needed is to make use of generators that require magnetic materials for their construction.

We can, therefore, hardly hope to make the magnetic field of a minesweeper equal to zero. We can, nevertheless, make it very small if we approach this objective as follows: (a) Use magnetic materials only where they are indispensable. The smaller the amount of magnetic materials, the more nearly field B is equal to field A, and the less the degaussing installation has to do. (b) Put in degaussing coils to make the degaussed magnetic field, C - A, as nearly equal to zero as possible 14