NAVSEA MIL-HDBK-802(SH) — MIL-HDBK-802(SH) Design of Electrical Equipment with Small Stray Magnetic Fields Manual PDF

Downloaded from https://www.everyspec.com MIL-HDBK-802 (SH) 2 July 1990 where: Al = Area of loop. Ii = Current in loop. 4.2.1.2.2.1 Example. If we have a current of 10 amperes, the magnetic moment of the four turn loop shown on figure 16 is: M = (7m)(5m)(2)(10A) + (5m)(3m)(1) (10A) + (3m)(1m)(1)(10A) M = 880 bz 4.2.1.2.2.2 Magnetic moment of loops of different areas. For loops with a large number of turns enclosing different areas, the magnetic moment can be computed just as above but the amount of work involved will be considerable because of the large number of turns. An alternate procedure that involves less work and will give a good approximation is as follows:

(a) Divide the loop into a number of sections such that all turns in a section enclose approximately equal areas. (b) Multiply the number of turns in each section by the current and average area enclosed by the turns in the section to obtain AND for the section. (c) Add all of the values of ANI for the different sections to obtain the total magnetic moment for the coil. 4.2.1.2.3 Vector character of magnetic moment. As mentioned in 4.2.1.2, the magnetic moment is a vector having a magnitude equal to ANI and having a direc- tional orientation. Given the orientation of the vector, it can be resolved into FIGURE 16. Four turn coil. 2 0