Downloaded from https://www.everyspec.com MIL-HDBK-802(SH) 2 July 1990 4.3.1.2 Principle of compensation. By the principle of compensation we shall mean the use of two or more adjacent current loops with magnetic moments of such magnitude and polarity that the resultant magnetic field produced by some Of the current loops is nearly equal and opposite to the resultant magnetic field produced by the remaining current loops. As a consequence, the magnetic field of some of the current loops compensates that of the others and the net or total magnetic field for the whole group can be substantially less than the magnetic field produced by one of the current loops alone.
4.3.1.2.1 Compensation with two current loops Two current loops furnish the simplest example of compensation. Suppose that the current loops are of exactly the same size and shape, are in exactly the same place, and carry exactly equal but opposite currents. In this idealized case, compensation is perfect and the resultant magnetic field is zero. Unfortunately , this is better than we can hope to realize in practice. We can, in principle at least, have two current loops of exactly the same size and shape carrying exactly equal and opposite currents , but we cannot have them in exactly the same place. They must be separated.
If they are widely separated, there is no compensation and we have only two single current loops. If on the other hand, they are close together, the resultant magnetic field produced by the two loops is proportional to the magnetic moment of each times the distance between their centers To obtain the smallest possible stray magnetic field, the following conditions must be satisfied: (a) The magnetic q oments of the current loops must be equal and opposite. (b) The magnetic moment of each current loop must be as small as possible. (c) The separation between the two loops must be as small as possible. These conditions should always be satisfied when applying the principle of compensation.
4.3 1.2.2 Compensation with more than two current loops Consider a case with more than two current loops. Start out with a pair of two equal and opposite current loops, and then bring another pair close to it that produces a magnetic field opposite to that of the first pair. The resultant magnetic field of the four loops will be smaller than from either opposing pair alone even if the magnetic moments of all the individual current loops are equal. We can go still further and bring up another array of four loops that is opposed to the first. The magnetic field from the eight loops will be smaller than that from four.
Obviously, this process can be continued as far as we like, doubling the number of current loops and decreasing the stray magnetic field at each step. In the interest of simplicity in the design and construction of equipment, this process should obviously be carried no further than is necessary to make the stray magnetic field as small as required. In many cases, one pair of two opposing current loops will be enough. We will, however, encounter four loops or two pairs in the folded type of disconnect switch boxes or contactor panels, and more than four loops in multipolar generators and motors. 35