Downloaded from https://www.everyspec.com MIL-HDBK-802(SH) 2 July 1990 4.3.1.2.3 Vector character of compensation. We have, up to now, tacitly assumed that the magnetic moments of the current loops under consideration were all parallel. Now , consider a number of current loops grouped close together without requiring that their magnetic moments be parallel. For compensation we must have: 4.3.1.2.4 Example of compensation. What can be done by using the principle of compensation is shown in table I.
This gives the maximum value of the vertical component of stray magnetic field on horizontal planes 6, 9, 12, and 15 meters below the centers of the following three different arrangements of current loops dipoles. (a) A single X dipole, figure 22 (A), with M = 9300 ampere meters- squared. (b) An opposing pair of X dipoles, figure 22 (B), each with M = 9300 ampere meters-squared and with a separation of 0.3 meter between centers. (c) Four X dipoles, figure 22 (C), arranged at the corners of a horizontal square 0.3 meter on a side to make two pairs of opposing dipoles with M = 9300 ampere meters-squared for each dipole. TABLE I. The effects of compensation on magnetic field.