Downloaded from https://www.everyspec.com MIL-HDBK-802(SH) 2 July 1990 (a) The contour lines for zero vertical component of magnetic field on a plane at a distance z meters below the center of the array. The regions on this plane where the vertical component of magnetic field is positive (shaded) and the regions where it is negative (unshaded). The points where the vertical component of the magnetic field has its greatest magnitude on the plane at distance z below the center of the array. These points are indicated by crosses. (b) (c) 4.3.2.5.3 Computation of contour maps.
For the arrays with four or more dipoles, the partial contours shown were constructed from the approximate formulas in 4.3.3.6 through 4.3.3.26. For the arrays with two dipoles, the magnetic field produced by each dipole was calculated separately and the contour map was constructed to show the algebraic sum of the two fields. This procedure gives rigorously correct results given by the approximate formula for the magnetic field produced by two dipoles. For this reason, the maximum values of the stray magnetic field calculated from the formulas will not agree exactly with the maximum values shown on the contours for arrangements with two dipoles.
For the same reason, the contours shown for the arrays of 4.3.3.3 and 4.3.3.4 are not exactly alike even though the approximate formulas for the two arrays are exactly the same. It should also be noted that the difference between the exact and approximate results are fairly small even though z, the distance from the center of the array to the plane of the contour, is only five times the distance between the two dipoles. For larger values of z, the exact and approximate values will agree even more closely. 4.3.2.6 Dimensions. In all formulas given in 4.3.3, the following will apply: (a) Components of magnetic field are in microtesla.
(b) Magnetic moments are in ampere meters-squared, (c) Distances are in meters. (d) [4-48] 4.3.2.7 Y dipoles. Formulas are given for X dipoles and Z dipoles but not for Y dipoles. The reason is that Y dipoles can be changed to X dipoles by rotating the coordinate axes so that separate formulas are not needed. For a similar reason, formulas are not given for Z dipoles on the y axis since this case can be reduced to Z dipoles on the x axis by rotation of the coordinate axes. There are a number of other cases in which two different arrays can be changed from one to the other by a rotation of the coordinate axes about the z axis.
In all such cases, a formula is needed and given for only one array. 4.3.2.8 Radial dipole arrays . Formulas are given in 4.3.3.18 through 4.3.3.26 for the magnetic field produced by circular arrays of four, six, and eight dipoles equally spaced on a circle of radius r in the xz or xv plane. The magnetic moments are along the radii drawn from the origin of the coordinate system and are alternately plus and minus; plus for a moment directed away from 39