NAVFACENGCOM MIL-HDBK-1001/l — NAVFACENGCOM MIL-HDBK-1001/l: Руководство по архитектурным требованиям и принципам проектирования

Downloaded from https://www.everyspec.com G MIL-HDBK-1001/l the Northern Hemisphere, heating loads can be reduced by locating functions with minimal heating requiremen~s, such as storage rooms, toilets, and mechanical rooms, along the north facade of a building. In temperate climates , rooms such as office areas with high lighting requirements should be located to maximize natural light benefits and reduce artificial lighting loads. k.3.2 Glazing. Where required for solar protection, exterior glazing should be insulated glass, preferably tinted. The use of reflective glass may be prohibited by local conditions. Operable sash glazing systems may be considered to facilitate natural.

ventilation and reduce cooling loads Operable windows can complicate the design and operation of heating, ventilating, and air conditioning (HVAC) systems. In the Northern Hemisphere, glazing should generally be maximized 6n the south facades and avoided or limited on the east and west. Glazing must be protected from different angles of solar penetration. . 4.3.3 Solar Shading. Cooling loads can be reduced by protecting exterior surfaces and interior spaces from undesirable direct solar penetration. Stepped building forms and wing walls can permit a building to be self -shading, Overhangs , trellises, and screens will divert direct solar gain.

The overall benefits’ of shading must be considered against the added costs , if any. G 6.3.4 Davlizhtinr. Cooling loads required to dissipate heat generated by artificial lights represent a major source of energy consumption in buildings By maximizing desirable daylighting, the amount of artificial lighting can be reduced as well as the cooling load generated by, the lights. 4.3.4.1 Davlighting Control. Daylighting should.be minimized when the heat gain is more harmful than the benefits of natural light. Solar shading devices can also be used to control daylight penetration. Window blinds can also be used to control daylight and solar gain. 4.3.L.2 Li~ht Shelves.

Light shelves are highly reflective surfaces from which light is reflected onto the ceiling and back further into the room. 4.3.4.3 Clerestories. Interior spaces can be’effectively illuminated by daylighting from clerestories augmented with artificial lighting fixtures This can often provide a pleasant, effective work environment at minimal increased cost’, 4.3.5 Artificial Lieht. Artificial lighting systems should have energy efficient fixtures and ballasts , and lamps should be controlled by dimmers or multiple switching to allow adjustment of lighting levels”. Task lighting should also be considered.

The initial iost of task lighting systems can be offset by energy savings resulting from a reduction of overhead artificial light fixture usage and heat dissipation. User comfort can also be increased 9