EPSON — Set the Fabric Thickness and Head Height

Print Workflow Head Height This setting adds the distance from the print head to the belt. Use it to set a safe distance from the fabric surface so that the print head will be protected. Set it to protect the print head from fluff generated from the fabric and from fabric edge (ear) processing. Print Head Fabric edge (ear) processing Margin: 2 mm Fluff Head Height Fabric thickness Fabric Belt Up to 10 mm can be set in total for Fabric thickness and Head height. Giving a 2 mm margin to this value, the print head height is a maximum of 12 mm. Recommended Head height setting: • High quality: 0.7 mm • Stable operation:

2.0 mm 112 • Appropriate values for Head height will vary according to the type of fabric used. • If the Head height setting is large, the gap between the print head and fabric surface will be large, possibly generating ink mist. For optimal adjustment, we recommend that you take the fabric type and thickness into account. • Manufacturer declines any responsibilities if the operator does not respect all the necessaries precautions to keep safe the main printing components also during these operations.