Print Workflow Set the Printer Configure the settings in the Print menu. Set the Fabric Thickness and Head Height Set the fabric thickness and head height according to the fabric that is used. Fabric Thickness Since ink is discharged while the print head moves at high speed, the ink dot position will change according to the distance from the print head to fabric surface. With bidirectional printing, the ink lands at the height position set with Fabric thickness. If this height is not correct, the inkdot position will differ depending on whether printing is from the left or right, causing print quality to drop.
Therefore, it is extremely important to ensure that the Fabric thickness setting matches the fabric thickness. The figures below show the ink dot positions when the Fabric thickness is incorrect versus when it is correct. When the Fabric thickness is correct, the ink dot positions will be uniform, resulting in high-quality printing. Fabric thickness is incorrect Fabric thickness is correct Print Head Margin Print Head Head Height Head Height Dot positions deviate. Fabric Belt Fabric thickness: 1 mm 111 Marg t Dot positions match. Fa Fabric thickness: 4 mm B Fabric thickness: 4 mm