EPSON — Error Messages

Troubleshooting 146 Error Messages Cause Action Print start error An error or fault has occurred in the control system during system initialization or printing. Restart the machine. First pixel error Pixel count error TIMEMAC error REQ error Interruption due to TIMEMAC error Generic error An unidentified error has occurred. Restart the machine. "Foreign material sensor" detected some foreign materials or a fabric error The foreign material detection sensor detected foreign material on the belt or wrinkles or folds in the fabric. Check if there is any foreign material on the belt and if the fabric is wrinkled or folded.

"Head stroke sensor" detected some foreign materials or a fabric error The head stroke sensor detected foreign material on the belt or wrinkles or folds in the fabric. Check if there is any foreign material on the belt and if the fabric is wrinkled or folded. HEAD4 $"x" DRV $"x" temperature > $"x"° The temperature of the print head drive substrate cannot be lowered. Clean or replace the cooling fan filters. For more information about cleaning and replacement, refer to the Maintenance Guide.