EPSON — Error Messages

Troubleshooting 145 Error Messages Cause Action "xx-x" albre receiver: +24cc power supply error An error has occurred in a +24 V power supply device on the machine. Press an "Emergency stop button". Turn off the power to the machine. Check the status of the device. Turn on the power to the machine. "x" albstep receiver: +24cc power supply error File opening error There is an error in the "ROBUST" file in the CAD system. Delete the file. Create the file again in the CAD system.

File reading error Incongruent data in source file Quantity of data incorrect in file header Too many colour row values specified Design file version old Design file version not supported The height pixels exceed the print capacity Height resolution differs from that in the file Length resolution differs from that in the file Drop type in file incorrect Height increments don't match those in the file Length increments don't match those in the file Out of memory A problem has occurred in the system memory. Check if the OS settings on the system PC have been changed. Restart the machine. There isn't enough memory to run the next band.

File not found The file to be printed was not found in the specified directory. Specify the correct file name and directory. Dongle error The system does not recognize the dongle. Contact qualified service personnel for assistance. Invalid dongle Colours different from those in the machine The printed color does not match either the file to be printed or the specified color. If there is no problem with the color to be printed, continue printing. Check the file to be printed. Colours in design file swapped