Workflow before Beginning Work Executing Set Point Set a Set Point (origin position) before printing in order to print at the correct coordinates. Immediately after turning on the power, releasing an emergency stop button, replacing fabric, adjusting the print heads, and/or performing head cleaning, be sure to execute Set Point before printing. 1 In Leonardo, click the [Setpoint] icon. 2 Press the reset button on the main electric box. 3 The print heads move, and the origin position is set. At this time, “Setpoint in progress” is displayed in the status bar of Leonardo and the tower lamp changes from red to white. When Setpoint is completed, the tower lamp changes from white to green.
79 If the print heads do not operate even after executing Set Point, please confirm the following. • All of the emergency stop buttons have been released. ∗ Five emergency stop buttons of this machine. ∗ Emergency stop buttons for devices linked to this machine (If there are linked devices).