EPSON — Checking the Emergency Stop Functions in the System

Workflow before Beginning Work Check the Operation of the Emergency Stop Equipment Check all emergency stop functions in the system. Checking the Emergency Stop Buttons on the Machine 1 Press an Emergency Stop Button. 80 2 that the tower lamp is red. 3 Turn the Emergency Stop Button to the right to release the emergency stop status. 4 Executes Set point. See "Executing Set Point" on page 79. 5 Confirm that the tower lamp is green. 6 There are five emergency stop buttons around the machine. Repeat procedures 1 to 5 to check the operation of each emergency stop button.

Checking the Emergency Stop Functions in the System If the system is linked with the emergency stop system of other equipment, check if the system's emergency stop function for that equipment is operating normally.