EPSON — Setting the Acrylic Board

Workflow before Beginning Work Nozzle Check Before printing, perform a nozzle check to make sure the nozzles are engaged. If a nozzle is not engaged, perform head cleaning. This step is not necessary when printing directly on fabric. 1 Open the front protection cover. 2 Affix the acrylic board to the printing area. Affix the acrylic board along the right edge, because the origin of the print heads is on the right side. 84 Use an acrylic board for the nozzle check, because the ink grains are very fine. Fabric can also be used, but makes it difficult to determine if a nozzle is not engaged. Items required:

• Acrylic board • Ruler / tape measure (to measure the distance from the edge of the print area to the edge of the paper) Setting the Acrylic Board The horizontal printing margin can be set in Leonardo, and therefore it is not necessary to set the right edge of the printing area to the affixing position.