Workflow before Beginning Work 3 Measure the distance from the edge of the belt (right side). 85 4 Close the front protective covers. Printing the Nozzle Check Pattern Set the print start position and ink size in [Maintenance]. Item Description Start printing Enter the length from the right edge of the printing area to the point where printing begins. (Units: mm) Drop size Select the drop size. If the check pattern is too fine and difficult to determine, select Large. Nozzle check Prints the check pattern. Extra mode Increase the amount of ink for the check pattern. Click [Nozzle check] to print the check pattern.
Item Description Start printing Enter the length from the right edge of the printing area to the point where printing begins. (Units: mm) Drop size Select the drop size. If the check pattern is too fine and difficult to determine, select Large. Nozzle check Prints the check pattern. Extra mode Increase the amount of ink for the check pattern.