EPSON — Installing the Fabric

Print Workflow 13 Affix the fabric to the belt. 14 Press the belt feed button (forward) on the rear panel to feed the fabric to the edge of the pressure roller. 15 Turn the selection switch (black) to the left and lift up the pressure roller. 16 Turn the switch on the fabric tension adjustment panel to the right to lock the spin- dle. The spindle does not move even if the fabric is pulled. 17 Pull the fabric from the front of the pressure roller to remove any slack in the fabric on the left and right. 18 Turn the selection switch (black) to the left and lower the pressure roller. 94 WARNING The descent speed of the pressure roller is slow, and it comes down gradually.

However, be sufficiently careful not to place your hands or fingers under the roller.