153 Mains Interference 7.4.1 VLT® Motion Control Tool MCT 31 MCT 31 is an off -line software package used to calculate harmonics based on polynomial interpolation between pre-defi ned simulation results. The advantage of this method is speed and the disadvantage is that it is less precise compared to a simulation. MCT 31 enables simulations with all Danfoss products, including mitigation solutions such as AHF passive fi lters and AAF active fi lters. Generic, non-Danfoss frequency converters can be simulated as well. MCT 31 can generate harmonic reports. 7.4.2 Harmonic Calculation Software (HCS) The HCS tool can be accessed on-line at www.danfoss-hcs.com. It is available in two levels:
basic for simple calculations and expert for more complex system level calculations. Behind the web interface of the HCS tool there is a powerful circuit simulator that performs a simulation of the specifi c system designed by the user. Therefore it is more precise than the interpolation-based MCT 31. HCS has a vast library containing Danfoss FC’s, AHF passive fi lters, AAF active fi lters. It also features the time-domain and frequency domain graphical visualisation of the voltages and currents in a system and comparing the harmonics to diff erent limit lines. HCS can also generate reports in HTML or PDF format.