Atari Games Final Lap — final_lap_2.jpg

Set-Up Final Lap Screw these brackets onto the sides of the seat platform and then onto the cabinet base (see Fig- ure 1-1). The holes in the seat platform and the cabinet are already threaded. Installing the Attraction Sign Rest the attraction sign on the top panel retainer, behind the panel. Center the attraction sign. 2. Screw in the three Phillips-head wood hold it in place. You can connect up to 4 cabinets. Each cabinet is shipped with a 6-foot long connecting cable. If you are connecting 3 or 4 cabinet togethers, you need longer cables. These are available from Atari Games Customer Service. These cables are 10 feet long (part no. 150031-120) and 20 feet long (part no. 150031-240).

The attraction sign mounts behind the top panel of the game. See Figure 4-1. 1. Connecting Cabinets 1. Turn off the game power to all the cabinets. 2. Find the Link PCB in the back of the game. Plug in the connecting cables as shown in Figure 1-2. Each cable must be connected from an input to an out- screws to put. Two Cabinets One Cabinet eo og Three Cabinets Four Cabinets Figure 1-2 1-4 Connected Cabinets and Their Link PCBs