Atari Games Final Lap — final_lap_2.jpg

Final Lap Set-Up 2 in. screw Socket-head screw Speaker Connection Plate Cabinet Harness Assembly Pipe Bracket Seat Platform Panel Seat Platform Seat Platform Bracket Seat Speaker Harness Assy Figure 1-1 Installing the Seat Platform 2. 3. Remove the pipe bracket inside each panel by re- 7. moving the two hex-head screws bracket to the platform base. 8. . Repeat steps 4 to 7 for t the pipe i on the other ther side side. that mount the . Replace both seat platf Is, Replace both seat platform panels Remove the two pipes from the cabinet packaging 9. and find the 3/8-inch diameter holes drilled near 10. Now slide the seat platform forward, and insert one end of each pipe. 4.

Reinstall the pipe bracket. Put the pipe bracket on the end of the pipe with the drilled holes. The bracket must be in front of both pipes into the holes on the base plate of the cabinet. Stop when the seat assembly is about 8-10 inches from the game cabinet. the drilled holes and the flat side of the bracket must face the seat platform. 11. In the bottom panel, plug left speaker harness into the left connector. Do the same for the right side. 5. Now, put the pipe in the seat platform and slide it all the way through the platform into the hole in the front. 12. Slide the seat platform all the way up to the cabinet. Be careful not to pinch the extra speaker harness wires. 6.

Fit the drilled holes in the pipe over the two-inch screw shaft in the base of the platform. 13.In the parts package two L-brackets and included with the game are eight socket-head screws. 1-3