To Reinstall: CAUTION Be careful not to damage the plastic sensor flags and gears on the left end of the Delivery Unit. 1 Place the plastic edge on the right end of the Delivery Unit into the chassis. Make sure that the plastic support tab on the right end of the Delivery Unit slides on top of the chassis. 2 Make sure that the plastic sensor flags and gears on the left end of the Delivery Unit can move freely. 3 Replace the metal mounting bracket (figure 6-12, callout 6) before replacing the Delivery Unit screws. Make sure that the plastic clips (figure 6-12, callout 5) are snapped into place before tightening the mounting screws (figure 6-12, callout 4).
176 Chapter 6 Removal and Replacement C4085-91087