Diverter Assembly Figure 6-14 Diverter Assembly CAUTION Support the Diverter Assembly access door during this procedure to prevent damage to the plastic hinge pins. 1 Open the Diverter Assembly access door and release the support struts (figure 6-14, callout 1) by sliding the strut ends forward and downward. 2 Remove 6 self-tapping screws (figure 6-14, callout 2). Note The access door support struts will fall free when the Diverter Assembly is lifted away from the access door. 3 Lift the Diverter Assembly up and away from the access door. C4085-91087 Engine Removal and Replacement 177