Diverter Door Assembly Figure 6-15 Diverter Door Assembly 1 Open the Diverter access door, and release the support struts (figure 6-15, callout 1) by sliding the strut ends forward and downward. 2 Rotate the door up to align the flat sides of the right hinge pin with the retaining slot (figure 6-15, callout 2), and lift upwards to release it from the retaining slot. 3 Continue lifting up on the right side of the door while pushing it to the left to rotate the left hinge pin out of its locating cavity. To Reinstall: 1 Insert the left side of the door into position first, and then rotate the right side down to snap the hinge pins into position. 2 Reconnect the support struts to the chassis.
178 Chapter 6 Removal and Replacement C4085-91087