Left Cover 1 Unplug the power cord and the C-link interface cables from the 2000-sheet Input Tray. 2 Remove the 2 screws that are located at the top of the 2000-sheet Input Tray’s Left Cover: 1 screw near each corner (figure 6-64, callout 1). 3 Remove the Left Cover from the unit: a Pull out on the top of the Left Cover, and then lift up on the Left Cover’s right side to clear the retaining tabs that are along the Left Cover’s bottom edge (callout 2). b Pull out on the Left Cover’s lower-left corner to release the plastic retainer tab that secures that corner of the cover to the chassis (callout 3). To Reinstall:
Figure 6-64 2000-sheet Input Tray Left Cover 1 Replace the left side of the Left Cover first (callout 3). 2 Tilt the right side of the Left Cover down and toward the chassis to place the lower retaining tabs over the chassis rail (callout 2). C4085-91087 2000-sheet Input Tray Removal and Replacement 235