Basic hardware procedures Checking the onboard indicators on the system board using the Indicate CSS button, see section "Using the CSS button on the system board" on page 49 . Using the CSS button on the system board If the system has been powered off, the onboard indicators guides you to the faulty component. V CAUTION It is mandatory to disconnect all power cords from the system in order to use the Indicate CSS functionality. К Shut down and power off the server. К Disconnect all power cords from the system. К Press the Indicate CSS button to highlight defective components, see section "Onboard indicators and controls" on page 419 . The indicator next to the defective component lights up.
4.2 Shutting down the server V CAUTION! For more information, see chapter "Important information" on page 35 . I This step is only required when upgrading or replacing non-hot plug components. К Inform the system administrator that the server will be shut down and put offline. К Terminate all applications. К Perform the required procedures described in the preliminary steps of each upgrade or maintenance task. К Shut down the server. I If the system is running an ACPI-compliant operating system, pressing the On/Off button will perform a graceful shutdown. К Switch on the ID indicator on the front panel and the I/O panel of the server, see section "Using diagnostic information" on page 47 .
RX2530 M4 Upgrade and Maintenance Manual 49