Basic hardware procedures 4.4.1 Extending the server out of the rack V CAUTION! Use the anti-tilt plate to prevent the rack from tipping when installing the rack. Pulling the server out of the rack without having installed the anti-tilt plate may cause the rack to tip over. Be careful not to pinch fingers or clothes when sliding out the server or pushing it back. Failure to do so may cause injury. For more information, see chapter "Important information" on page 35 . К Remove all remaining external cables from the I/O panel and expansion cards. Figure 5: Extending the server out of the rack К Fold down the two quick release levers (1).
К Pull the server out of the rack until it locks in place (2). V CAUTION! Do not use the extended server as a surface on which to put things or as a work surface, and strictly avoid leaning on or against it. RX2530 M4 Upgrade and Maintenance Manual 53