Basic software procedures 5.1.3 Removing backup and optical disk media К Ask the system administrator to eject all remaining backup or optical media from the backup or optical disk drive before removing it from the server. К If the backup media cannot be ejected by conventional means, and it is mandatory that the cartridge be removed prior to returning the drive for repair or disposing it, a manual tape extraction needs to be performed. For more information on "forcible" tape ejection, see the "Tape Facts" pages available to Fujitsu service partners from the following https address: https://partners.ts.fujitsu.com/com/service/ps/Servers/PRIMERGY/Pages/ TapeFacts.aspx For Japan:
Please contact Fujitsu support, if "forcible" tape ejection is necessary. I Fujitsu does not assume responsibility for any damage to the tape drive, the data cartridge/tape or for the loss of any data resulting from manual tape extraction procedures. 5.1.4 Verifying and configuring the backup software solution I This task only applies to Japan. Depending on the backup software solution, it may be necessary to disable or delete the backup drive from the backup software drive list before starting the maintenance task. I For more information on suitable backup software solutions and related documentation, see the Fujitsu web pages. 80 Upgrade and Maintenance Manual RX2530 M4