beckhoff TF5200 — 1 Overview

Overview 1 Overview Task This function permits a pause in the machining process to be made in a channel and to move the same physical axes from a second channel. This is referred to as a channel switchover. Properties Switching over a channel to react to events which require any path motion, e.g. changing a torch in a flame or gas cutting operation. Parameter An auxiliary channel is required here; it must contain the parameters [ } 11] for the auxiliary axes. Mandatory note on references to other documents For the sake of clarity, links to other documents and parameters are abbreviated, e.g. [PROG] for the Programming Manual or P-AXIS-00001 for an axis parameter.

For technical reasons, these links only function in the Online Help (HTML5, CHM) but not in pdf files since pdfs do not support cross-linking. Jog of path 8 Version: 1.17 TF5200 | TwinCAT 3 CNC