Description 2 Description Request The user has the frequent request to interrupt a running program in order to insert a path motion and then continue the program after the interruption. Inserting a path motion can be implemented by using an “auxiliary channel”. In this document, an “auxiliary channel” is referred to as a jog-of-path channel . A jog-of-path channel contains linked axes which are connected to the same physical axes as the axes in the actual channel. Switchover Channels are switched over by the PLC. Exclusive access of a channel to physical axes is controlled by a control unit provided for each channel.
Channel 2 Channel 1 Original program Jog of path Logical axis of channel Position controller Physical axis (drive) Fig. 1: Moving axes by different channels Position offset When an axis is moved by an inserted path motion, it also retains the offset in the original channel as soon as this channel regains access to the axis. If this is not required, the user must ensure that the axes are returned to the position they were in before the interruption. TF5200 | TwinCAT 3 CNC Jog of path 9 Version: 1.17