en Fig. 3 SelfClean button Press and hold the SeflClean button when nozzle is on the hard floor to order to use the maximum airflow and the minimum resistance for the brush roller. The best results of cleaning brush roller are with using function 3 times per 5 seconds. If it necessa- ry please hold the button longer ! Please note: We recommend using the SelfClean function after using the Turbo brush.
Description of the appliance 1 Nozzle holder with accessory connection* 2 Nozzle holder without accessory connection* 3 Carpet button* 4 SelfClean button 5 Inspection window with turbine system 6 Brush roller release button 7 Brush roller guide rod 8 Brush roller Maintenance Before carrying out any maintenance work, switch off the vacuum cleaner and pull out the mains plug. Remove the Turbo brush from the suction/telescopic pipe. Starting up for the first time Fig. 1* a) Nozzle without accessory connection: Place the Turbo brush on the suction pipe. To re- lease the connection, turn the pipe slightly and pull it out of the Turbo brush holder. b) Nozzle with accessory connection:
Slide the telescopic pipe until it clicks into place in the holder for the Turbo brush. To release the connection, push the release collar and pull out the telescopic pipe. Fig. 4 Use the release button to release the brush roller and pull it sideways out of the Turbo brush. Fig. 5 Remove the dirt. When hairs gets stuck between the brush roller re- lease button and the brush roller you can separate them by pulling on the release button with some force. Then you can clean the axis and put the parts back together. Vacuum brushing ! Please note: Only vacuum brush at full suction power, i.e. max. power setting on the vacuum cleaner. Fig.
6 Push the brush roller in sideways along the guide rod and into the Turbo brush, and lock it in place using the release button. ! Caution: The Turbo brush must only be used with the brush roller fitted. Cleaning carpets/carpeted floors When cleaning carpets, the brush roller starts auto- matically three seconds after the vacuum cleaner is switched on. When cleaning carpets, the turbine system works wi- thout any braking. This creates the maximum suction power for the nozzle. Subject to technical modifications. Cleaning hard floors The turbine system detects the type of flooring.
When changing from carpeted floors to hard floor, the tur- bine system starts to brake down the rotation speed and therefore reduces the noise level. If you change flooring from hard floor to carpet the turbine system doesn’t brake anymore and have again the maximum suction power. Fig 2* Carpet button* Press the Carpet button when vacuuming long-pile carpets. This reduce a force of pushing nozzle and speed up brush roller. ! Please note: The Carpet button can be pressed when cleaning all types of flooring. 26 *depending on model