Garmin PowerSwitch Specifications My Garmin PowerSwitch will not stay connected Verify the Garmin PowerSwitch device is receiving power. Verify that your vehicle's battery is supplying at least 12 V of power. The Garmin PowerSwitch device turns off automatically to preserve your vehicle's battery if it is receiving less than 12 V. Verify that Bluetooth technology is enabled on your paired navigation device or smartphone. Move the navigation device or smartphone closer to your Garmin PowerSwitch device. Wireless Cameras Your device can display the video feed from one or more connected wireless cameras.
Pairing the Camera with a Garmin Navigation Device You can pair the camera with a compatible Garmin navigation device. For more information about compatible Garmin devices, go to the product page at garmin.com/bc40 . 1 Update your navigation device to the latest software. Your device may not support the BC 40 camera without the latest software. For more information about updating the software, see the owner's manual for your navigation device. 2 Install batteries in the camera. The camera enters pairing mode automatically and the LED flashes blue while the camera is in pairing mode. The camera remains in pairing mode for two minutes.
If pairing mode expires, you can remove and reinstall the batteries. 3 Bring the compatible Garmin navigation device outside your vehicle and within 1.5 m (5 ft.) of the camera and turn on the navigation device. The device detects your camera automatically and prompts you to pair with it. 4 Select Yes . TIP: if the navigation device does not detect the camera automatically, you can select > Wireless Cameras > Add New Camera to pair with it manually. The device pairs with your camera. 5 Enter a name for the camera (optional). You should use a descriptive name that clearly identifies the location of the camera. 6 Select Done .
2 The device withstands incidental exposure to water of up to 1 m for up to 30 min. For more information, go to www.garmin.com/waterrating . 70 Appendix Dimensions (D x H) 75 x 125 x 32 mm (2.95 x 4.92 in.) Operating temperature range From -25° to 85°C (from -13° to 185°F) Wireless frequency 2.4 GHz @ 10 dBm Power input From 12 to 16 V using the included vehicle power cable. Maximum accessory output 30 A Maximum system output 100 A Current draw with all outputs off 3 mA Water rating IEC 60529 IPX72