Connecting the Device to Vehicle Power Before you can connect the device to vehicle power, you must remove the warning tag from the +12V terminal on the device. You should always confirm all electrical connections are secure and will not come loose while operating the device. 1 Connect the large ring end of the included ground wire to the negative terminal on the vehicle battery. 2 Connect the small ring end of the ground wire to the GND terminal on the device. 3 Connect the small ring end of the included 12-V cable to the +12V terminal on the device. 4 Tighten the 3 / 8 in. nut on the +12V terminal to a maximum torque specification of 4.52 N-m (40 lbf-in.).
You should confirm the nut cannot be loosened by hand. NOTICE Do not overtighten the +12V terminal to prevent damage to the terminal. 5 Connect the large ring end of the 12-V cable to the positive terminal on the vehicle battery. Pairing with a Garmin Navigation Device You can pair your Garmin PowerSwitch device with a compatible Garmin navigation device. 1 Turn on power to your Garmin PowerSwitch device and place your compatible Garmin navigation device within 1 m (3.3 ft.) of it. 2 On your compatible navigation device, open the Garmin PowerSwitch app. 3 Follow the on-screen instructions to complete the pairing and setup process. The main app dashboard appears.
After the devices are paired, they connect automatically when they are turned on and within range. Appendix 69