Charts and 3D Chart Views Selecting a Lane Width You can indicate the width of the navigation lane appearing in Perspective 3D or Mariner’s Eye 3D. Note : Mariner’s Eye 3D is available with a preprogrammed BlueChart g2 Vision data card. 1. From the Home screen, select Charts . 2. Select Perspective 3D or Mariner’s Eye 3D . 3. Select Menu > Chart Appearance > Lane Width . 4. Enter the width. 5. Select Done . Showing Surface Radar The chartplotter must be connected to a marine radar to show surface radar. You can show radar returns from the surface of the water in Perspective 3D or Mariner’s Eye 3D. Note : Mariner’s Eye 3D is available with a preprogrammed BlueChart g2 Vision data card.
Perspective 3D with Surface Radar Information 1. From the Home screen, select Charts . 3. Select Menu > Surface Radar > On . 2. Select Perspective 3D or Mariner’s Eye 3D . Showing Other Vessels See “Configuring the Appearance of Other Vessels” ( page 58 ). Showing and Configuring Data Bars See “Data Bars” ( page 56 ). Using Waypoints and Tracks See “Waypoints” ( page 32 ) or “Tracks” ( page 36 ). 20 GPSMAP ® 4000/5000 Series Owner’s Manual