Chapter 3 Advanced Tool Tutorials 39. To select the reference for Point1, click in the area to the right of the blue arrow (Figure 3–25), and click on the three dots, which displays the Select Reference window, as shown in Figure 3–26. Point 1 Point 2 FIGURE 3–26. Select Reference Window 40. Click on the check mark to the left of FindPin 1:FindP1 to expand the tree view. Select PointofBestMatch:PointofBestMatch and click OK (Figure 3–26). 41. To select the reference for Point2, click in the area to the right of the blue arrow (Figure 3–25), and click on the three dots, which displays the Select Reference window, as shown in Figure 3–26. 42.
Click on the check mark to the left of FindPin 2:FindP2 to expand the tree view. Select PointofBestMatch:PointofBestMatch and click OK (Figure 3–26). 43. Minimize the Step Tree Editor. 44. Click . Observe that Pin to Pin Distance tolerance is highlighted and Pin to Pin Distance has been green check marked. 3-36 Getting Started with Visionscape GigE Cameras