If you select No at this point, the Front Panel will display System Error Code 07:10 . For more information on troubleshooting this error code, refer to page 50. Check also System Error Code 11:10 (refer to page 51) or System Error Code 02.1:10 (refer to page 48). If you select Yes , then the Front Panel will display: • Starting Carriage. If there is a failure at this point, the Front Panel will display System Error Code 02.1:10 . For more information on troubleshooting this error code, refer to page 48. Check also System Error Code 11:10 (refer to page 51) or System Error Code 01.0:10 (refer to page 47). • Checking Carriage rev.
If there is a failure at this point, the Front Panel will display System Error Code 02.1:10 . For more information on troubleshooting this error code, refer to page 48. Check also System Error Code 11:10 (refer to page 51). 23. A message will appear on the Front Panel asking whether you would like to check the ISS Communication. Select Yes or No by using the Up and Down keys and press Enter to confirm your selection. If you select No , the printer skips this test and goes to the next one: 24. If you select Yes , the Printer will check the ISS Communication and the following information will be displayed on the Front Panel: • Starting Sausalito.
If there is a failure at this point, the Front Panel will display System Error Code 01.0:10 . For more information on troubleshooting this error code, refer to page 47. • Checking ISS PCA rev. At this stage, the Front Panel displays the value for the ISS PCA revision and asking whether you would like to Continue. Press any key to continue:. Tests and Utilities If any of the channels cannot be read, the Front Panel will display System The value for the ISS PCA revision must be more than 0.832 , if not the Front Panel will display System Error Code 01.2:10 . For more information on troubleshooting this error code, refer to page 48.
Check also System Error Code 01.0:10 (refer to page 47 ) If there is a problem in reading the values, the Front Panel will display System Error Code 01.0:10 . For more information on troubleshooting this error code, refer to page 47. Entering the Service Tests Menu 111