HP — Clean the Encoder Strip

number Q6715A (HP Designjet Z6100 User Maintenance Kit). NOTE: When the message is displayed on the Front Panel, a ‘silent’ warning message is added within the system error log ‘8:01’. This helps when reviewing the error log history, to see if the message has been displayed. Cleaning Procedure 1. From the Customer Preventative Maintenance Kit use the cloth shown. 2. Make sure that the printer is idle and that Carriage Assembly is in the area of the Service Station on the right side of the printer. 3. Wet the cloth with tap water (1)and remove any excess water (2). Preventive Maintenance 4. Open the Printer Window. Preventive Maintenance 455