• Switch the Power OFF from the back of the Printer and disconnect the Power cord. Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. • Check that the OMAS Module cable is not damaged and is correctly connected to the OMAS Controller PCA. • Replace the OMAS Controller Card ⇒ Page 362 • Replace the OMAS Module ⇒ Page 351. System Error: System Error Codes 50.2:10 Problem Description: Error with the media advance sensor controller board. Corrective Action: Try the following: • Switch the Power OFF from the back of the Printer and disconnect the Power cord.
Reconnect the power cord and power On the Printer. • Check that the Printer has the latest Firmware version. If not, update the Firmware to the latest version. • Check that the CAN cable and the Encoder Cable are correctly connected to the OMAS PCA and the Main PCA (refer to • Check the connection between the OMAS PCA and the Sausalito PCA (the Sausalito is the card connected just behind the OMAS PCA). • Check that the OMAS Module cable is not damaged and is correctly connected to the OMAS Controller PCA. • Replace the OMAS Controller Card ⇒ Page 362 System Error: 51:10 Problem Description: Error detected with the sensor on the Window. Corrective Action: Try the following:
• Check that the Window Sensor cable is not damaged and is correctly connected to the Interconnect PCA. • Replace the Window Sensor. System Error: 51.1:10 Problem Description: Error detected with the sensor on the Service Station Door. Continuable and Non-Continuable Error Codes 65