11. exit 12. app-default-gateway ip-address guest-interface network-interface 13. nameserver# ip-address 14. end 15. guestshell enable DETAILED STEPS Procedure Guest Shell Configuring the AppGigabitEthernet Interface for Guest Shell Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. • Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 interface AppGigabitEthernet interface-number Example: Device(config)# interface AppGigabitEthernet 1/0/1 Configures the AppGigabitEthernet interface and enters interface configuration mode. Step 4 switchport mode trunk Example:
Device(config-if)# switchport mode trunk Sets the interface into permanent trunking mode and negotiates to convert the neighboring link into a trunk link. Step 5 exit Example: Device(config-if)# exit Exits interface configuration mode and returns to global configuration mode. Step 6 app-hosting appid name Example: Device(config)# app-hosting appid guestshell Configures an application and enters application-hosting configuration mode. Step 7 app-vnic AppGigabitEthernet trunk Example: Device(config-app-hosting)# app-vnic AppGigabitEthernet trunk Configures a trunk port as the front-panel port for application hosting, and enters application-hosting trunk configuration mode.
Step 8 vlan vlan-ID guest-interface guest-interface-number Example: Device(config-config-app-hosting-trunk)# vlan 4094 guest-interface 0 Configures a VLAN guest interface and enters application-hosting VLAN-access IP configuration mode. Guest Shell 17