cisco — Enabling Guest Shell on the Management Interface

Enabling Guest Shell on the Management Interface This task is applicable to Cisco Catalyst 9200 Series Switches, Cisco Catalyst 9300 Series Switches, Cisco Catalyst 9400 Series Switches, Cisco Catalyst 9500 Series Switches, and Cisco Catalyst 9600 Series Switches. Note SUMMARY STEPS 1. enable 2. configure terminal 3. app-hosting appid name Guest Shell Enabling Guest Shell on the Management Interface Command or Action Purpose Step 9 guest-ipaddress ip-address netmask netmask Example: Device(config-config-app-hosting-vlan-access-ip)# guest-ipaddress 192.168.2.2 netmask 255.255.255.0 (Optional) Configures a static IP address. Step 10 exit Example:

Device(config-config-app-hosting-vlan-access-ip)# exit Exits application-hosting VLAN-access IP configuration mode and returns to application-hosting trunk configuration mode Step 11 exit Example: Device(config-config-app-hosting-trunk)# exit Exits application-hosting trunk configuration mode and returns to application-hosting configuration mode. Step 12 app-default-gateway ip-address guest-interface network-interface Example: Device(config-app-hosting)# app-default-gateway 192.168.2.1 guest-interface 0 Configures the default management gateway. Step 13 nameserver# ip-address Example: Device(config-app-hosting)# name-server0 172.16.0.1 Configures the Domain Name System (DNS) server.

Step 14 end Example: Device(config-app-hosting)# end Exits application-hosting configuration mode and returns to privileged EXEC mode. Step 15 guestshell enable Example: Device# guestshell enable Enables the Guest Shell service. Guest Shell 18