cisco — Enabling and Disabling NETCONF Access from Guest Shell

4. app-vnic management guest-interface interface-number 5. end 6. show app-hosting list 7. guestshell enable DETAILED STEPS Procedure Enabling and Disabling NETCONF Access from Guest Shell Before you begin Initialize the following commands from within the Guest Shell to initialize the NETCONF-YANG access: Guest Shell Enabling and Disabling NETCONF Access from Guest Shell Command or Action Purpose Step 1 enable Example: Device> enable Enables privileged EXEC mode. • Enter your password if prompted. Step 2 configure terminal Example: Device# configure terminal Enters global configuration mode. Step 3 app-hosting appid name Example:

Device(config)# app-hosting appid guestshell Configures an application and enters application-hosting configuration mode. Step 4 app-vnic management guest-interface interface-number Example: Device(config-app-hosting)# app-vnic management guest-interface 0 Configures the management gateway of the virtual network interface and guest interface, and enters application-hosting management-gateway configuration mode. Step 5 end Example: Device(config-app-hosting-mgmt-gateway)# end Exits application-hosting management-gateway configuration mode and returns to privileged EXEC mode. Step 6 show app-hosting list Example:

Device# show app-hosting list Displays the current status of the installed applications. Note Guest Shell is displayed in the list of applications, only if it is installed. Step 7 guestshell enable Example: Device# guestshell enable Enables the Guest Shell service. Guest Shell 19