• When the LSB is 0, white/black reverse mode is turned off. GS H n • When the LSB is 1, white/black reverse mode is turned on. [Name] Select printing position of HRI characters [Format] ASCII GS H n Hex 1D 48 n Decimal 29 72 n [Range] 0 ≤ n ≤ 3, 48 ≤ n ≤ 51 [Description] Selects the printing position of HRI characters when printing a bar code. n selects the printing position as follows: GS I n • HRI indicates Human Readable Interpretation. [Name] Transmit printer ID [Format] ASCII GS I n Hex 1D 49 n Decimal 29 73 n [Range] 1 ≤ n ≤ 3, 49 ≤ n ≤ 51 [Description] Transmits the printer ID specified by n as follows: n =2, Type ID Commands 5-21 n Printing posiition 0, 48 Not printed.
1, 49 Above bar code. 2, 50 Below bar code. 3, 51 Both above and below the bar code. n Printer ID Specification ID (hexidecimal) 1, 49 Printer model ID TM-H5000/H5000P 0FH 2, 50 Type ID See table below. 3, 51 ROM version ID Depends on ROM version. Bit Off/On Hex Decimal Function 0 Off 00 0 Two-byte character code not supported. 1 On 02 2 Auto-cutter equipped. 2 Off 00 0 DIP switch 2-2 is set to off. On 04 4 DIP switch 2-2 is set to on.