GS L n L n H [Name] Set left margin [Format] ASCII GS L n L n H Hex 1D 4C n L n H Decimal 29 76 n L n H [Range] 0 ≤ n L ≤ 255 0 ≤ n H ≤ 255 [Description] Sets the left margin using n L and n H in standard mode. • The left margin is set to [( n L + n H Ч 256) Ч horizontal motion unit)] inches from the beginning of the line. GS P x y [Name] Set horizontal and vertical motion units [Format] ASCII GS P x y Hex 1D 50 x y Decimal 29 80 x y [Range] 0 ≤ x ≤ 255 0 ≤ y ≤ 255 [Description] Sets the horizontal and vertical motion units to 1/ x inch and 1/ y inches, respectively. • When x and y are set to 0, the default setting of each value is used.
Њ GS V m Ќ GS V m n [Name] Select cut mode and cut paper [Format] Њ ASCII GS V m Hex 1D 56 m Decimal 29 86 m Ќ ASCII GS V m n Hex 1D 56 m n Decimal 29 86 m n [Range] Њ m = 1, 49 Ќ m = 66, 0 ≤ n ≤ 255 5-22 Commands Bit Off/On Hex Decimal Function 3 Off 00 0 No MICR reader. On 08 8 A MICR reader is installed. 4 Off 00 0 Not used. Fixed to Off. 5 - - - Undefined. 6 - - - Undefined. 7 Off 00 0 Not used. Fixed to Off.