Supermicro H8DC8/H8DCi — Supermicro H8DC8/H8DCi Motherboard User & Service Manual PDF

Chapter 2: Installation Wake-On-LAN The Wake-On-LAN header is desig- nated JWOL. See the table on the right for pin defi nitions. You must have a LAN card with a Wake-On-LAN connector and cable to use the Wake- On-LAN feature. Note: Wake-On-LAN from S3, S4, S5 are supported by LAN1. LAN2 sup- ports Wake-On-LAN from S1 only. Wake-On-Ring Wake-On-Ring Pin Defi nitions (JWOR) The Wake-On-Ring header is desig- nated JWOR. This function allows Pin# Defi nition your computer to receive and "wake- 1 Ground (Black) up" by an incoming call to the modem 2 Wake-up when in suspend state. See the table on the right for pin defi nitions. You must have a Wake-On-Ring card and cable to use this feature.

I 2 C Header The header at J24 is for I 2 C, which may be used to monitor the status of the power supply, fans and system temperature. See the table on the right for pin defi nitions. SMBus Header The header at J22 is for the System Management Bus. Connect the ap- propriate cable here to utilize SMB on the system. See the table on the right for pin defi nitions. 2-13 Wake-On-LAN Pin Defi nitions (JWOL) Pin# Defi nition 1 +5V Standby 2 Ground 3 Wake-up I2C Header Pin Defi nitions (J24) Pin# Defi nition 1 Clock 2 Data 3 PWR Fail 4 Gnd 5 +3.3V SMBus Header Pin Defi nitions (J22) Pin# Defi nition 1 Data 2 Ground 3 Clock 4 No Connection